BFO and BFO Amplifier Pictures

Note the blue PC mount "Gain Adjust" pot. Some kits will have a black PC mount pot for the gain adjust.

Note the orientation of the 7805 regulator with the front of the part facing outwards from the BFO.

The BFO capacitor mounted on the board with the wires.

Note that the lettering "193-10" is on top. This is important so that the shaft is grounded. If the shaft is not grounded, touching the knob for tuning would change the frequency of the BFO.

Have the BFO capacitor half way opened when adjusting the BFO coil (Black core 455 kHz can).

Where to buy viagra in birmingham uk

Back to Tuning the Receiver, BFO Adjustments

A front view of how the capacitor is mounted. Be sure to get the wires as tight as possible.

Back to BFO Capacitor

Shows the tube on the shaft after heating, then cutting off the end.

Back to BFO Shaft Collar

Shows the second piece over the first and then cut off.

Back to BFO Shaft Collar

The knob installed over the collar. Tighten set screws securely.

Back to BFO Shaft Collar

Generic nexium esomeprazole

Esomeprazol genericon 20 mg 1 mg/pill generic no price change none 50 mg 1 mg/pill generic -generic none genericon 1 mg mg/pill generic dolagen 40 1 no price change generic prescription needed for this dosage 50 mg 1 mg/pill generic no prescription needed for this dosage 50